Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Worcester Bosch Gasket Fibre 87186842710

Worcester Bosch

Worcester Bosch Gasket Fibre 87186842710

Worcester Bosch fibre gasket, part 87186842710, for Greenstar Camray and Camray External oil boilers; seals the joint to keep combustion and water paths tight.

At a glance

  • Part type: Gaskets, seals and washers
  • Also known as 1022711
Manufacturer part no.
87186842710
Showing prices

£7.69

£6.41 ex. VAT · VAT at 20%

Available to order · 1-2 working days
Available to order · 1-2 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

This is a fibre gasket manufactured by Worcester Bosch, supplied under part number 87186842710. It is a sealing component from the gasket, seal and washer range used across the Greenstar Camray family of oil-fired boilers. The gasket sits between mating faces inside the appliance, compressing to form a tight joint that keeps flue gases, water or air where they belong and protects the surrounding components from heat and corrosion.

Signs this part needs replacing

  • Visible weeping or staining around the joint the gasket seals
  • A gasket that has hardened, flattened or cracked and no longer springs back when compressed
  • Sooty streaks or a smell of combustion products escaping near the sealed face
  • Water tracking down the casing or onto components below the joint
  • The gasket breaking up or sticking to the mating face during a service strip-down

Before you order

  • Confirm the boiler model and serial number against the compatibility list, as the same part number is used across several Camray variants
  • Check the old gasket against the previous part numbers listed here before fitting, particularly on older appliances
  • Inspect the mating faces for pitting or distortion while the joint is open, as a damaged face will not seal even with a new gasket
  • Have the appliance reassembled and commissioned by a competent engineer, and check any oil or combustion settings disturbed during the work

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.