
Heatrae Sadia
Heatrae Sadia Tundish 95605811
Heatrae Sadia tundish, part 95605811, with 3/4 inch and 1 inch connections for Megaflo unvented cylinder discharge pipework.
At a glance
- Also known as 1730685
AvailabilityCall for price
Availability: no longer made. Call us and we'll check for stock.
No longer made: call us
The manufacturer has discontinued this part. Our team will check for remaining stock or a suitable replacement.
01302 279234Opening hours
- Mon–Fri
- 7:30am–5pm
- Sat
- 9am–12pm
- Sun
- Closed
Or request a price online
Tell us what you need and we will come back to you. No payment is taken.
30-day returns
Unused, in original packaging.
What it is
The Heatrae Sadia tundish, part 95605811, is a visible discharge fitting for unvented hot water cylinders. It is installed in the discharge pipework from the cylinder relief valve so that any discharge is visible at a glance. The fitting provides 3/4 inch and 1 inch connections.
Signs this part needs replacing
- Water is continually visible or dripping at the tundish
- Scale, debris or sediment is restricting flow through the fitting
- The tundish body or connections are cracked, damaged or leaking
- The tundish is missing, removed or incorrectly fitted in the discharge run
Before you order
- Confirm the pipework sizes match the 3/4 inch and 1 inch connections on the tundish
- Confirm the cylinder model, as Megaflo units with internal expansion and with no internal air volume are listed
- Check the relief valve and discharge pipework, since water at the tundish can indicate a fault upstream of the fitting
Compliance
| Barcode / EAN | 5012496058118 |
|---|---|
| Alternative numbers | 1730685 |
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| HEATRAE SADIA HEATRAE SADIA PRODUCTS | — | — | — | |
| HEATRAE SADIA MEGAFLO WITH INTERNAL AIR VOLUME | — | — | — | |
| HEATRAE SADIA MEGAFLO WITHOUT INTERNAL AIR VOLUME | — | — | — | |
| HEATRAE SADIA Megaflo (Internal Expansion) | — | — | — | |
| HEATRAE SADIA Megaflo (No Internal Air Volume) | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
