Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Myson Thermocouple C/W Nuts 308S048

Myson

Myson Thermocouple C/W Nuts 308S048

At a glance

  • Part type: Thermocouple
  • Also known as 1180022
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Hanicks code
308S048
Manufacturer part no.
308S048
GC number
384-971

AvailabilityCall for price

Availability: no longer made. Call us and we'll check for stock.

No longer made: call us

The manufacturer has discontinued this part. Our team will check for remaining stock or a suitable replacement.

01302 279234

Opening hours

Mon–Fri
7:30am–5pm
Sat
9am–12pm
Sun
Closed

Or request a price online

Tell us what you need and we will come back to you. No payment is taken.

Part: 308S048 Myson Thermocouple C/W Nuts 308S048

Whichever you would like us to reply to.

Helps us check the part fits.

30-day returns

Unused, in original packaging.

What it is

The Myson 308S048 is a thermocouple supplied complete with nuts. It is a flame-sensing safety device used in Myson Housewarmer back boiler unit gas fires, where it holds the gas valve open only while the pilot flame is proven. If the pilot flame is lost, the thermocouple output collapses and the valve closes, shutting off the gas supply to the burner.

Signs this part needs replacing

  • The pilot flame lights but goes out as soon as the control knob is released.
  • The appliance repeatedly locks out or shuts down shortly after the burner has been lit.
  • The pilot flame is established but the gas valve will not hold in.
  • The pilot flame appears weak or unstable at the thermocouple tip.
  • The thermocouple lead or tip shows heat damage, corrosion or a loose connection at the valve.

Before you order

  • Check the appliance GC number against the compatibility list to confirm the correct thermocouple for your Housewarmer model.
  • Confirm the model and variant of your Housewarmer BBU fire, as several fire fronts share the 30/45 BBU and 45 BBU chassis.
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.