Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Navien Thermal Fuse 30020776A

Navien

Navien Thermal Fuse 30020776A

Thermal fuse for Navien NCB300 and NCB500 combi boilers, a safety cut-out that opens the circuit when temperatures exceed safe limits.

At a glance

  • Appliance family: NCB300 and NCB500 series
Manufacturer part no.
30020776A
Showing prices

£6.50

£5.42 ex. VAT · VAT at 20%

Available to order · 3 working days (HRP Trade)
Available to order · 3 working days (HRP Trade)
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Navien 30020776A is a thermal fuse used in Navien NCB300 and NCB500 combi boilers. It is a temperature-sensitive safety device that opens the electrical circuit when the surrounding temperature rises beyond its set limit, shutting the appliance down before heat damage occurs. Once the fuse has operated it does not reset and must be replaced.

Signs this part needs replacing

  • The boiler fails to fire, with no heating or hot water.
  • The appliance locks out and will not run after a reset attempt.
  • A continuity test across the fuse shows an open circuit.
  • The fuse body is discoloured, blistered or shows signs of localised heat damage.
  • The boiler repeatedly shuts down once it reaches operating temperature.

Before you order

  • Confirm the boiler model and serial number against the fit list above.
  • Check the markings and rating on the existing fuse match the part being ordered.
  • Isolate the electrical supply and the gas supply before carrying out any work.
  • Establish and rectify the cause of the overheating before fitting a new fuse, otherwise the replacement will fail in the same way.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.