
Ideal
Ideal Relief Valve Temperature & Pressure 173202
Ideal temperature and pressure relief valve, part 173202, for Istor HE260 and HE325 unvented cylinders.
At a glance
- Part type: Temperature and pressure relief valve
- Appliance family: Ideal Istor HE unvented cylinders
- Also known as 1179341
AvailabilityCall for price
Availability: no longer made. Call us and we'll check for stock.
No longer made: call us
The manufacturer has discontinued this part. Our team will check for remaining stock or a suitable replacement.
01302 279234Opening hours
- Mon–Fri
- 7:30am–5pm
- Sat
- 9am–12pm
- Sun
- Closed
Or request a price online
Tell us what you need and we will come back to you. No payment is taken.
30-day returns
Unused, in original packaging.
What it is
The Ideal 173202 is a combined temperature and pressure relief valve used on Ideal Istor unvented hot water cylinders. It opens when cylinder pressure or stored water temperature rises beyond the set limit, discharging water safely through the tundish and discharge pipework rather than allowing the vessel to over-pressurise. It is a serviceable safety component on the Istor HE range and is listed under Ideal part type Pressure & Temperature Relief Valve.
Signs this part needs replacing
- Water continually dripping or running from the discharge pipe or tundish with the system cold
- The valve weeps after a legitimate discharge and fails to reseat
- Scale or debris on the seat holding the valve partially open
- Cylinder pressure or temperature rising above normal operating limits
- Visible corrosion, cracking or deformation around the valve body or outlet
Before you order
- Confirm the model and GC number from the appliance data badge before ordering, as the Istor HE260 and HE325 use different GC references
- Check the valve seat and mating face on removal and renew any washer or seal that shows damage
- Isolate the cylinder, drain down as required and depressurise before removing the old valve
- Refit and test the discharge pipework and tundish arrangement after replacement
Mechanical
| Part type | Pressure & Temperature Relief Valve |
|---|---|
| Appliance family | Istor HE |
Compliance
| Manufacturer part number (MPN) | 173202 |
|---|---|
| Barcode / EAN | 5022141732027 |
| Commodity code | 8481 40 90 00 |
| Alternative numbers | 1179341 |
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| IDEAL IDEAL : ISTOR HE260 | — | — | — | |
| IDEAL IDEAL : ISTOR HE325 | — | — | — | |
| IDEAL ISTOR HE260 | 41-394-13 | 41-394-13 | — | — |
| IDEAL ISTOR HE325 | 41-394-14 | 41-394-14 | — | — |
| IDEAL COMMERCIAL IDEAL COMMERCIAL PARTS | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
