Suntec
Suntec Sunt Seal AN45C Fuel Pump E02065W
Shaft seal for the Suntec AN45C oil pump, sealing the drive shaft against oil loss.
At a glance
- Also known as 3100180
£30.00
£25.00 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Sunt seal is a shaft seal for the Suntec AN45C oil pump, used on oil-fired boiler and burner installations. It seals the pump drive shaft where it passes through the pump body, retaining oil inside the pump and keeping air out of the suction side. It is a service item for pumps that have started to weep or draw air at the shaft.
Signs this part needs replacing
- Oil weeping or tracking from the shaft end of the pump body
- Oil staining or a pool of oil beneath the pump
- A persistent oil smell around the burner or boiler casing
- Air being drawn in at the shaft, causing unstable oil pressure or a rough, noisy flame
- Pump pressure that will not hold steady at the gauge
Before you order
- Confirm the pump on the appliance is a Suntec AN45C — check the data plate on the pump body
- Inspect the shaft and seal seating area for scoring or wear before fitting a new seal
- Check the pump reference number against the number quoted here to confirm the correct seal
Compliance
| Alternative numbers | 3100180 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| OIL SPARES SUNTEC | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.