
Heatrae Sadia
Heatrae Sadia Steam Condenser Sealing Gasket 95611819
Steam condenser sealing gasket for Heatrae Sadia Supreme unvented water heaters, part number 95611819.
At a glance
- Also known as 1732860
£13.20
£11.00 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Heatrae Sadia steam condenser sealing gasket, part number 95611819, is a sealing component for the steam condenser assembly on Heatrae Sadia Supreme unvented water heaters. It seals the condenser joint to prevent water and steam escaping. The gasket is listed for the 155 model and other units across the Supreme range.
Signs this part needs replacing
- Water weeping or dripping from the steam condenser joint
- The gasket has hardened, flattened or cracked with age
- Scale or corrosion deposits around the sealing face
- Repeated loss of pressure or water discharge at the condenser
- Damp staining or residue on the casing below the joint
Before you order
- Confirm your appliance model and, where applicable, the serial number against the fitment list
- Check part number 95611819 against the manufacturer's parts list for your unit
- Inspect the joint for other worn seals or washers that may need replacing at the same time
Compliance
| Alternative numbers | 1732860 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| HEATRAE SADIA HEATRAE SADIA PRODUCTS | — | — | — | |
| HEATRAE SADIA SUPREME 140 | — | — | — | |
| HEATRAE SADIA SUPREME 140, 155 & 170 (1999 & 2002 MODELS) | — | — | — | |
| HEATRAE SADIA SUPREME 140, 155 & 170 FROM 2002 | — | — | — | |
| HEATRAE SADIA SUPREME 155 | — | — | — | |
| HEATRAE SADIA SUPREME 165 | — | — | — | |
| HEATRAE SADIA SUPREME 170 | — | — | — | |
| HEATRAE SADIA SUPREME SS 150 (SERIAL NO. ENDING BN) | — | — | — | |
| HEATRAE SADIA SUPREME SS 165 | — | — | — | |
| HEATRAE SADIA SUPREME SS 165 (SERIAL NO. ENDING BN) | — | — | — |
Showing 10 of 19 compatible appliances.
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
