Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
RWC 2.1/8 Bar Compact Inlet Control Group

SPECIAL OFFERS

RWC 2.1/8 Bar Compact Inlet Control Group

Compact RWC inlet control group for OSO and Vokera Aquaflow unvented hot water cylinders.

Manufacturer part no.
hrp0254
Showing prices

£162.00

£135.00 ex. VAT · VAT at 20%

Available to order · 3 working days (HRP Trade)
Available to order · 3 working days (HRP Trade)
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The RWC 2.1/8 Bar Compact Inlet Control Group is a cold water inlet control assembly for unvented hot water cylinders. It combines the pressure reducing valve, strainer and expansion relief functions into a single compact manifold. It is fitted on the cold water supply to the cylinder to regulate incoming mains pressure and protect the cylinder and its safety devices.

Signs this part needs replacing

  • Reduced or erratic hot water flow at the taps, often caused by scale or debris blocking the strainer or reducing valve seat
  • Water weeping or dripping from the valve body, relief port or connections
  • Discharge from the expansion relief valve with no fault at the cylinder
  • Inlet pressure at the cylinder drifting above or below the set pressure, causing poor performance or repeated safety valve operation
  • Noisy or vibrating operation at the inlet group when taps are opened

Before you order

  • Confirm your cylinder make and model against the fit list above
  • Check the pressure rating of the existing inlet group matches the replacement
  • Inspect the pipework connections and available space, as the compact body must suit the installation
  • Confirm whether a balanced cold water take-off is required for your system

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.