Reznor
Reznor Solonoid Coil 30-03-828
Reznor solenoid coil, part 30-03-828, for Fsg and Fso cabinet heaters fitted with Riello 40 burners.
At a glance
- Part type: solenoid coil
£50.10
£41.75 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Solonoid Coil is a Reznor component supplied for their oil-fired cabinet heaters. It energises the oil valve on appliances fitted with Riello 40 burners, allowing fuel through when the burner is called to fire. It is listed under Reznor part number 30-03-828.
Signs this part needs replacing
- The burner locks out or fails to fire when heat is demanded
- No oil is delivered to the burner even though the controls are calling for heat
- The burner runs intermittently, often dropping out once the coil is warm
- Visible damage, swelling or a burnt smell from the coil body
- The coil shows no electrical continuity across its winding
Before you order
- Confirm the burner fitted to the appliance is a Riello 40, as fitment depends on it
- Check the appliance model against the Fsg and Fso list above
- Compare the connections and mounting of the failed coil with the replacement
- Read the part number from the existing coil where it is still legible
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| REZNOR FSG205-3 - CABINET HEATER - UNITS WITH RIELLO 40 BURNERS | — | — | — | |
| REZNOR FSG235-3 - CABINET HEATER - UNITS WITH RIELLO 40 BURNERS | — | — | — | |
| REZNOR FSG293-3 - CABINET HEATER - UNITS WITH RIELLO 40 BURNERS | — | — | — | |
| REZNOR FSO205-3 - CABINET HEATER - UNITS WITH RIELLO 40 BURNERS | — | — | — | |
| REZNOR FSO235-3 - CABINET HEATER - UNITS WITH RIELLO 40 BURNERS | — | — | — | |
| REZNOR FSO293-3 - CABINET HEATER - UNITS WITH RIELLO 40 BURNERS | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.