
Halstead
Halstead SIT Gas Valve Modulator Solenoid 862025
SIT gas valve modulator solenoid, Halstead part 862025, for Trio 30/90 and Wickes 30/90 Combi boilers.
At a glance
- Also known as HALSTEAD862025, 1293938
- Gas valve work must be carried out by a Gas Safe registered engineer
AvailabilityCall for price
Availability: no longer made. Call us and we'll check for stock.
No longer made: call us
The manufacturer has discontinued this part. Our team will check for remaining stock or a suitable replacement.
01302 279234Opening hours
- Mon–Fri
- 7:30am–5pm
- Sat
- 9am–12pm
- Sun
- Closed
Or request a price online
Tell us what you need and we will come back to you. No payment is taken.
30-day returns
Unused, in original packaging.
What it is
The SIT gas valve modulator solenoid is a Halstead gas valve component, supplied under part number 862025. It sits within the gas valve assembly and modulates gas pressure to the burner in response to the boiler's control signal. It is used on Halstead Trio 30/90 and Wickes 30/90 Combi appliances.
Signs this part needs replacing
- Boiler fails to light or drops out on a call for heat
- Burner flame extinguishes shortly after ignition
- Boiler fires but runs at a fixed rate with no modulation
- Solenoid coil reads open or short circuit when tested
Before you order
- Confirm the appliance model matches one of the listed fits
- Check part number 862025 against the gas valve already fitted
- Confirm the fault lies with the solenoid rather than the valve body or control board
- Gas valve work must be carried out by a Gas Safe registered engineer
Compliance
| Alternative numbers | HALSTEAD862025, 1293938 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| HALSTEAD SIME HALSTEAD TRIO 30/90 | 47-283-01 | 47-283-01 | — | — |
| HALSTEAD TRIO 30/90 COMBI | 47-283-01 | 47-283-01 | — | — |
| HALSTEAD WICKES 30/90 COMBI | 47-283-02 | 47-283-02 | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
