Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Worcester Bosch Boiler Seal 87110043240

Worcester Bosch

Worcester Bosch Boiler Seal 87110043240

Worcester Bosch 87110043240 boiler seal for Greenstar gas appliances, GC number H04-630, alternative number 1012645.

At a glance

  • Part type: Gaskets, o-rings, seals and washers
  • Also known as 1012645
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
87110043240
GC number
H04-630
Showing prices

£10.06

£8.38 ex. VAT · VAT at 20%

Available to order · 1-2 working days
Available to order · 1-2 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Worcester Bosch 87110043240 is a boiler seal from the manufacturer's gaskets, o-rings, seals and washers range. It is fitted inside Greenstar appliances, where it forms the sealing face at a joint and keeps that connection tight under normal operating temperatures and pressures. The seal is listed under GC number H04-630 and carries the alternative number 1012645.

Signs this part needs replacing

  • Water weeping or damp staining around the joint the seal sits in
  • The seal material has hardened, flattened or cracked
  • Scale, sludge or corrosion build-up on the sealing face
  • Recurring pressure loss traced back to a sealed joint
  • The seal was disturbed or damaged during a service or component swap

Before you order

  • Check the GC number and the appliance serial plate to confirm the correct seal for your model.
  • Cross-check the alternative number 1012645 against the part being removed.
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.