Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
Worcester Bosch Heat Exchanger Seal 15mm 87161064350

Worcester Bosch

Worcester Bosch Heat Exchanger Seal 15mm 87161064350

15mm DHW heat exchanger seal for Worcester Bosch Greenstar, Greenstar 8000 Life/Style and ErP combi boilers, part 87161064350.

At a glance

  • Part type: Gasket, seal and O-ring - DHW heat exchanger seal
  • Also known as WB87161064350, 1014907, N7284
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
87161064350
GC number
H08-797
Showing prices

£5.04

£4.20 ex. VAT · VAT at 20%

In stock
Order within 29m for same-day dispatch
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Worcester Bosch 87161064350 is a 15mm seal for the domestic hot water heat exchanger on Worcester Bosch gas boilers. It sits at the heat exchanger joint and forms a watertight barrier, stopping water escaping as it passes through the unit during hot water draw-off. It is a single-piece service part intended for replacement when the original seal has hardened, flattened or started to weep.

Signs this part needs replacing

  • Water weeping or a visible drip at the heat exchanger joint, often showing as a crusty white or rusty stain
  • Limescale or corrosion residue building up around the seal face
  • The seal feels hard, brittle or flattened once the joint is opened
  • System pressure dropping and needing regular top-ups with no other obvious cause
  • Damp patches inside the casing below the heat exchanger after hot water use

Before you order

  • Check the GC number and model of your appliance against the compatibility list, as this seal is listed against a wide range of GC numbers across the Greenstar, Greenstar 8000 Life, Greenstar 8000 Style and ErP families
  • Confirm the part number on the existing seal or the appliance documentation matches 87161064350 before ordering
  • If the heat exchanger joint is being opened, check the condition of the other seals and O-rings in the assembly at the same time
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.