
Worcester Bosch
Buderus 7095595 Safety Valve 4 Bar
4 bar safety valve, part 7095595, for Buderus GB162 and Worcester Greenstar Condens 7000 series boilers.
At a glance
- Also known as 2242099
£99.30
£82.75 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Buderus 7095595 is a 4 bar safety valve used in the GB162 condensing boiler family. It relieves excess pressure from the heating circuit when the system reaches its set limit. The same valve is fitted across the Worcester Greenstar Condens 7000 series.
Signs this part needs replacing
- Water weeping or discharging continuously from the relief pipe
- System pressure dropping and needing frequent topping up
- Boiler pressure rising above the normal operating range
- Valve failing to reseat after a pressure event
- Scale or debris visible at the valve outlet
Before you order
- Confirm your boiler model against the fit list
- Check that the system design pressure matches a 4 bar valve
- Inspect the discharge pipework for blockage before fitting
- Depressurise the system before removing the old valve
Compliance
| Barcode / EAN | 4047416306575 |
|---|---|
| Alternative numbers | 2242099 |
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| BUDERUS GB162 V2 100KW | — | — | — | |
| BUDERUS GB162 V2 50KW | 41-406-66 | 41-406-66 | — | — |
| BUDERUS GB162 V2 65KW | 41-406-67 | 41-406-67 | — | — |
| BUDERUS GB162 V2 85KW | — | — | — | |
| BUDERUS GB162-100 G20 | — | — | — | |
| BUDERUS GB162-50 G20 | — | — | — | |
| BUDERUS GB162-65 G20 | — | — | — | |
| BUDERUS GB162-80 G20 | — | — | — | |
| BUDERUS LOGAMAX PLUS GB162 65KW | — | — | — | |
| BUDERUS LOGAMAX PLUS GB162 80KW/100KW | — | — | — |
Showing 10 of 22 compatible appliances.
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.
