Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Find parts by applianceTrade account
IDEAL173938 Pump Complete

Ideal

IDEAL173938 Pump Complete

Ideal 173938 complete pump assembly for Ideal domestic boiler spares, supplying the primary circulation through the heating circuit.

At a glance

  • Part type: Complete pump assembly
  • Appliance family: Ideal domestic boilers
  • Also known as 1780572, IDEAL173938
Manufacturer part no.
173938
Showing prices

£191.47

£159.56 ex. VAT · VAT at 20%

In stock
Order within 2h 42m for same-day dispatch
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Ideal 173938 is a complete pump assembly supplied as a single unit for Ideal domestic boilers. It is the circulation pump that moves water around the primary heating circuit, drawing heated water from the heat exchanger and pushing it through the radiators and hot water cylinder coil before returning it to the boiler.

Because the assembly arrives complete rather than as a bare pump head, it covers the pump body, motor and connection points in one component, which suits a straight swap when the original pump has seized, become noisy or lost its flow rate.

Signs this part needs replacing

  • The boiler fires but the radiators stay cold or heat unevenly, with the flow and return temperatures close together.
  • The pump runs loudly, with grinding, humming or rumbling that continues after the system has settled.
  • The pump body is hot to touch while the pipework either side stays cool, indicating the impeller is not turning.
  • Repeated overheat lockouts or a flow-related fault code appears on the boiler display.
  • Water weeps from the pump housing, seal face or the joint between the pump and the boiler pipework.

Before you order

  • Check the boiler model and GC number on the appliance data badge and match them against the compatibility information for this part number.
  • Confirm the pump currently fitted carries the same Ideal part number, as pump assemblies differ between boiler ranges and revisions.
  • Inspect the pump gasket and sealing washers on removal, as these are commonly disturbed when the assembly is taken off and may need replacing separately.

Not sure which part?

Tell the parts assistant what it's going into — the appliance make and model, or the GC number off the data badge — and it will check this part is on the fit list.