
Gledhill
Gledhill 3 Pole Contactor XB002
Three-pole 63 A contactor, part XB002, for Gledhill Electramate 2000 12kW electric boilers.
At a glance
- Also known as 2000331
£230.38
£191.98 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Gledhill XB002 is a three-pole contactor rated at 63 A, used to switch the high-current heating load in Gledhill Electramate 2000 electric boilers. It is a normally open (N/O) device that closes on a signal from the boiler's control circuit to energise the elements. It is a serviceable electrical component within the appliance's power switching circuit.
Signs this part needs replacing
- Contactor chatters, buzzes or fails to pull in when the boiler calls for heat
- Pitted, burnt or blackened contact faces, or visible arcing damage
- Boiler fails to heat or heats intermittently despite a call for heat
- Burning smell or heat discolouration around the contactor body or terminals
- Contacts stuck closed, leaving the elements energised when they should be off
Before you order
- Confirm the appliance model against the fitment list above before ordering
- Check the part number on the existing contactor matches XB002
- Verify the coil and contact ratings of the fitted unit match this 63 A three-pole contactor
- Isolate the electrical supply and confirm dead before removing or fitting any component
Compliance
| Alternative numbers | 2000331 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| GLEDHILL ELECTRAMATE 2000 12KW | — | — | — | |
| GLEDHILL ELECTRMATE 2000 12kW | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.
