Special Offers HPF Insulation 28/1/1 1/4

HPF insulation sized 28/1/1 1/4, listed under part number TUF125. It is a moulded insulation component intended for pipework on Spirotech installations, where it limits heat loss from the pipe surface and provides a protective outer layer. The material is shaped to the pipe run so it can be fitted without disturbing the surrounding installation.

• The insulation surface is torn, split or crumbling away from the pipe.
• The material has become damp or saturated and no longer insulates effectively.
• Visible condensation or heat loss around a section where the insulation is missing or displaced.
• Gaps or open joints between insulation sections admitting cold air to the pipe.
• The insulation has hardened, cracked or lost its shape and no longer sits tightly against the pipework.

• Confirm the size designation on the existing insulation matches 28/1/1 1/4.
• Check the insulation is being fitted to a Spirotech installation, as listed in the fitment data.
• Inspect the full pipe run and order enough sections to cover every exposed length in one go.
• Check the condition of the pipe surface and any clips or fixings before refitting insulation.