Altecnic
Altecnic Flow Limiter 1/2 MxF ABS Plastic 6 Litres/Min Green SY-RP6LF
Altecnic 1/2 inch male x female ABS plastic flow limiter rated at 6 litres per minute, green coded.
£9.13
£7.61 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Altecnic flow limiter is a 1/2 inch male x female fitting in ABS plastic, colour coded green and rated to restrict flow to 6 litres per minute. It is used within Altecnic flow regulation assemblies to hold the flow rate at a fixed value. The fitting controls the volume of water passing through the circuit rather than shutting it off.
Signs this part needs replacing
- Flow rate through the circuit drops below the rated 6 litres per minute
- Flow rate rises above the rated figure, indicating the restrictor is no longer controlling volume
- Visible scale, debris or sediment build-up inside the limiter body
- Cracking, deformation or damage to the ABS plastic housing
- Leakage at the male or female connection, or a poor seal after refitting
Before you order
- Confirm the connection is 1/2 inch male x female and matches the port it is being fitted to
- Check the required flow rate for the circuit, as this limiter is rated at 6 litres per minute
- Verify the green colour code matches the flow rate required for the installation
- Confirm the limiter is being fitted within an Altecnic flow regulation assembly
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| ALTECNIC flow regulation | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.