Altecnic
Altecnic ABS Plastic Flow Limiter SY-RP348LF
Altecnic 3/4 MxF ABS plastic flow limiter in white, factory set to restrict flow to 8 litres per minute.
£10.92
£9.10 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Altecnic 3/4 MxF ABS Plastic Flow Limiter is a white in-line restrictor fitting that caps the flow through the pipework it is installed in at 8 litres per minute. It is part of the Altecnic flow regulation range and is fitted where a fixed, repeatable flow rate has to be maintained rather than left to the system's own resistance.
Signs this part needs replacing
- Flow at the outlet has dropped below the expected rate, indicating a blocked or scaled limiter orifice
- Measured flow rate no longer holds near 8 litres per minute and drifts with pressure changes
- Water weeps or drips from the limiter body or its threaded connections
- Rattling, hammering or whistling noise at the fitting under normal draw-off
Before you order
- Confirm the connection on the appliance or pipework is 3/4 MxF, matching male and female ends
- Check that 8 litres per minute is the flow rate required for the installation, as the restriction is fixed
- Verify the ABS plastic body is suitable for the temperatures and water quality at the point of fitment
- Check the existing limiter for debris or scale before assuming the fitting itself has failed
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| ALTECNIC flow regulation | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.