Altecnic
Altecnic Flow Limiter 1/2 MxF 6 l/min Green SY-RO6LF
Altecnic 1/2 MxF brass flow limiter rated at 6 litres per minute, green marked, for boiler flow regulation.
£12.42
£10.35 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Altecnic 1/2 MxF Brass Flow Limiter is a flow regulation component that restricts water through the pipework to a set rate of 6 litres per minute. It has a 1/2 inch male x female threaded connection and a brass body, marked green to identify the flow rate. It is used in boiler and heating system pipework where the flow rate must be held to a fixed figure.
Signs this part needs replacing
- Flow at the outlet measures above or below the rated 6 litres per minute
- Reduced flow or poor hot water performance at the appliance served by the limiter
- Visible scale, debris or blockage in the bore or on the brass body
- Water weeping from the threaded connections
- Whistling or noise at the fitting during draw-off
Before you order
- Confirm the connection size and gender (1/2 inch male x female) match the existing fitting
- Confirm that 6 litres per minute is the flow rate required for the appliance
- Check that the green marking matches the flow rate band specified for the installation
- Confirm there is enough access to remove and refit the limiter on the pipework
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| ALTECNIC flow regulation | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.