Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Glow-worm Injector Johnson 7215 S203516

Glow-worm

Glow-worm Injector Johnson 7215 S203516

At a glance

  • Part type: Injector
  • Also known as 1333800
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
S203516
GC number
376-968
Showing prices

£17.68

£14.73 ex. VAT · VAT at 20%

In stock
Order within 12m for same-day dispatch
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.Call the technical teamSend a technical question

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Glow-worm S203516 is a gas injector of the Johnson 7215 type, fitted to Glow-worm Express appliances. It sits at the burner inlet and meters the gas supply so the burner receives the correct volume and pressure for clean combustion. The injector orifice is a precision component, so it is replaced as a complete unit rather than cleaned or reamed.

Signs this part needs replacing

  • The burner fails to light, or lights and then drops out shortly after ignition.
  • Flame picture is weak, uneven or lifting away from the burner ports.
  • Sooting or discolouration appears around the burner or on the heat exchanger.
  • The gas rate measured at the meter sits outside the figure on the appliance data badge.
  • The injector orifice shows visible blockage, debris or mechanical damage.

Before you order

  • Check the GC number on the appliance data badge against the numbers in the compatibility list below.
  • Confirm the injector reference on the existing part is Johnson 7215 before ordering.
  • Cross-reference older paperwork using the previous number 203516 and the alternative number 1333800.
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.