EOGB
EOGB Detector End On IRD1020.1
EOGB IRD1020.1 detector end on for Honeywell and Satronic boiler control applications.
£300.70
£250.58 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The IRD1020.1 is a detector end on manufactured by EOGB, listed for Honeywell and Satronic control arrangements on boiler appliances. It sits at the sensing point of the flame detection circuit, so its condition governs whether the burner control confirms a flame and allows the burner to run.
Signs this part needs replacing
- Burner locks out at start-up or shortly after ignition despite a flame being present.
- Repeated lockouts that clear on reset with no other fault identified.
- Flame signal that is weak, unstable or drops out intermittently during a run cycle.
- Soot, contamination or physical damage visible at the detector end.
Before you order
- Confirm the detector fitted to the appliance is marked IRD1020.1, as detector types are not freely interchangeable.
- Check the burner control family on the appliance against the Honeywell and Satronic arrangements listed here.
- Verify the mounting arrangement at the burner head before ordering.
- Isolate the appliance and its electrical supply before removing the existing detector.
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Honeywell - Satronic | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.