Popular OIL
Danfoss 1.10 x 60 H Nozzle 030H6922
Danfoss oil burner nozzle rated at 1.10 gal/h with a 60 degree H spray pattern, part number 030H6922.
£13.20
£11.00 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Danfoss 1.10 x 60 H Nozzle, part number 030H6922, is a pressure-jet oil burner nozzle used to atomise fuel oil into a fine spray for combustion. It is fitted to the burner's oil line and meters the flow of oil while shaping the spray to suit the combustion head. The nozzle carries a 1.10 gal/h flow rating and a 60 degree H pattern.
Before you order
- Check the burner data plate or commissioning sheet for the required nozzle flow rating, spray angle and pattern before ordering, as the wrong combination affects combustion.
- Confirm the existing nozzle markings match 1.10 gal/h and 60 degrees so the replacement follows the burner's set-up.
- If the nozzle size is being changed, allow for a full combustion check afterwards, including pump pressure, CO2 and smoke readings.
- Have the burner isolated and the oil supply shut off before removing the nozzle, and fit a new nozzle with clean hands and tools to avoid contaminating the orifice.
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| POPULAR OIL SPARES AIR DAMPERS | — | — | — | |
| POPULAR OIL SPARES OIL SPARE PARTS | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.