EOGB
EOGB 2.00 x 80 A Delavan Nozzle D04-0200-80-A
EOGB Delavan oil burner nozzle marked 2.00 x 80 A, for use on EOGB Delevan boiler burners.
£15.07
£12.56 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The 2.00 x 80 A Delavan Nozzle is an oil burner nozzle supplied by EOGB for use on EOGB Delevan boiler burners. It atomises fuel oil into a fine spray so the burner can achieve a clean, stable flame inside the combustion chamber. The nozzle designation 2.00 x 80 A identifies the flow rate, spray angle and spray pattern of the unit fitted.
Signs this part needs replacing
- The burner becomes difficult to light or fails to fire reliably.
- Combustion deteriorates, with smoke, sooting or a yellow, lazy flame.
- The flame becomes unstable, pulsating or noisy during operation.
- Fuel consumption rises without any change to settings or demand.
- The nozzle body or its seating shows signs of weeping or fuel deposits.
Before you order
- Confirm the existing nozzle carries the same 2.00, 80 and A markings, as flow rate, spray angle and pattern must match the burner's setup.
- Confirm the appliance is an EOGB Delevan boiler burner as listed under Fits.
- Check the nozzle body and seating for damage or blockage before fitting a replacement.
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Delevan | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.