EOGB
EOGB BFP52E R5 Oil Pump 2-Solenoid D01-071N2204
EOGB BFP52E R5 oil pump with two solenoids, used on EOGB Danfoss oil-fired boiler applications.
£414.92
£345.77 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The BFP52E R5 is an oil pump with two solenoids, supplied by EOGB for use on EOGB Danfoss oil-fired boiler applications. It handles the delivery and pressure regulation of the oil supply to the burner, with the twin solenoid arrangement controlling oil flow through the pump. The pump forms part of the burner's fuel circuit and must be set up in line with the appliance manufacturer's commissioning data.
Signs this part needs replacing
- Burner locks out repeatedly and will not run consistently
- Pump body or shaft seal showing an oil weep or leak
- Noisy pump operation, such as rattling or grating under load
- Unstable or unattainable oil pressure at the pressure gauge
- Poor flame quality or flame failure after the pump has been in service
Before you order
- Confirm the pump designation on the existing unit matches BFP52E R5
- Check whether the old pump is a two-solenoid type before ordering
- Verify the appliance model against the fitment listed here
- Have the burner's commissioning data to hand so pressures can be set correctly after fitting
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.