EOGB
EOGB Coil for BFP 110V 071N0052
110 V solenoid coil for BFP oil pump assemblies, supplied by EOGB under part reference 071N0052.
£80.65
£67.21 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The EOGB Coil for BFP 110v (071N0052) is a 110 V solenoid coil for BFP oil pump assemblies. It energises the solenoid valve on the pump so oil can be delivered to the burner. It is supplied under the EOGB Danfoss accessories range.
Signs this part needs replacing
- Burner fails to fire or locks out because the pump solenoid does not open
- Coil reads open circuit or shows no continuity when tested
- Coil body is swollen, discoloured or gives off a burnt smell
- Pump runs but no oil is delivered when the coil is energised
- Intermittent operation as the coil warms up
Before you order
- Confirm the pump on the appliance is a BFP-series unit
- Confirm the supply is 110 V; a 230 V coil is not interchangeable
- Check the part reference on the existing coil against 071N0052
- Isolate the electrical supply before removing or fitting the coil
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss Accessories | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.