Danfoss
Danfoss Nozzle 0.85 x 80 H 030H8918
Danfoss 0.85 x 80 H oil burner nozzle, part 030H8918, for EOGB Danfoss oil boilers.
At a glance
- Also known as 3025316
£9.58
£7.98 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Danfoss 0.85 x 80 H nozzle is an oil burner nozzle, part number 030H8918, used in EOGB Danfoss oil-fired boiler applications. It meters and atomises the oil supply into a fine spray so the burner can achieve a stable, clean flame. The nozzle is a service item and is normally renewed as part of routine oil boiler maintenance.
Signs this part needs replacing
- Soot deposits on the baffles, heat exchanger or flue, indicating poor atomisation
- Erratic or unstable flame, or flame lift-off at the burner
- Smoke or high CO readings at the flue during combustion analysis
- Reluctance to light or repeated lockouts on start-up
- Rising fuel consumption without a change in demand
Before you order
- Confirm the nozzle marking on the existing nozzle matches 0.85 x 80 H
- Check your boiler model against the manufacturer's parts list to confirm fitment
- Inspect the nozzle holder, electrodes and leads while the burner is open, as these are commonly disturbed during a nozzle change
- Have the combustion settings checked and re-commissioned after fitting
Compliance
| Alternative numbers | 3025316 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.