EOGB
EOGB 0.55 x 80 H LE Nozzle
EOGB 0.55 x 80 H LE oil burner nozzle for Danfoss-based EOGB boiler applications.
£45.88
£38.23 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The 0.55 x 80 H LE nozzle is an oil burner nozzle supplied under the EOGB brand for Danfoss burner assemblies. It meters and atomises the fuel supply so the burner can establish a clean, stable flame in the combustion chamber. It is listed for EOGB Danfoss boiler applications.
Signs this part needs replacing
- Combustion readings drift outside the expected CO2 or CO range despite correct pump pressure and air setting
- Visible soot deposits, smoke or dark flue gas at start-up or during running
- Unstable or pulsating flame, or difficulty achieving a steady lockout-free start
- Nozzle body, strainer or orifice showing contamination, damage or wear after extended running
Before you order
- Confirm the existing nozzle marking matches 0.55 x 80 H LE exactly — flow rate, spray angle and pattern must all agree
- Check the burner model is an EOGB Danfoss unit before fitting
- Verify pump pressure is set to the value specified for the appliance, as flow rate depends on it
- Inspect the nozzle holder and strainer and renew if contaminated
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.