Danfoss
Danfoss Oil Nozzle 01.00 x 80 EH D01-030H8320
Danfoss oil burner nozzle with a 1.00 flow rating, 80° spray angle and EH spray pattern, for EOGB Danfoss oil-fired boilers.
At a glance
- Also known as 3025360
£9.58
£7.98 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Danfoss 01.00 x 80 EH is an oil burner nozzle with a 1.00 flow rating, an 80° spray angle and an EH spray pattern. It atomises fuel oil into a fine spray so the burner can mix it with combustion air and burn it efficiently. It is used on EOGB Danfoss oil-fired boiler burners.
Signs this part needs replacing
- Black smoke or soot deposits at the flue
- Unstable, pulsating or ragged flame
- Difficulty establishing or holding ignition
- Fuel consumption rising without a change in demand
- Combustion readings drifting outside the acceptable range
Before you order
- Confirm the burner's required flow rating, spray angle and spray pattern — all three must match.
- Check the appliance model against the manufacturer's parts list.
- Inspect the nozzle holder, electrodes and leads while the burner is open.
Compliance
| Alternative numbers | 3025360 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.