EOGB
EOGB 0.30 x 80 H Nozzle D01-030H8102
EOGB Danfoss-type 0.30 x 80 H nozzle for pressure jet oil boilers.
£20.80
£17.33 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
This is a 0.30 x 80 H nozzle supplied by EOGB for Danfoss-type oil burner applications. It is a pressure jet atomising nozzle that meters oil flow and shapes the spray pattern for combustion in an oil-fired boiler. The 0.30 x 80 H designation sets the rated flow, the spray angle and the hollow cone spray pattern.
Signs this part needs replacing
- Boiler locks out or fails to establish a stable flame on start-up
- Visible soot deposits, smoke or a persistent kerosene-like smell at the appliance
- Erratic or weak flame, or a flame that lifts away from the burner head
- Poor combustion readings that cannot be corrected by adjusting air or pump pressure
- Nozzle body, strainer or orifice visibly blocked, distorted or worn
Before you order
- Confirm the existing nozzle is marked 0.30 x 80 H, as flow rate, spray angle and pattern must match the burner manufacturer's settings
- Check the burner is a Danfoss-type assembly before fitting
- Verify the pump pressure and combustion settings against the appliance instructions after fitting
- Handle the nozzle by the body only and avoid touching the orifice face before installation
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.