Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Danfoss Nozzle 1.20 x 60 H 030H6923

Danfoss

Danfoss Nozzle 1.20 x 60 H 030H6923

Danfoss 1.20 x 60 H oil burner nozzle, part number 030H6923, for oil-fired boiler applications.

At a glance

  • Also known as 3025416
Manufacturer part no.
D01-030H6923
Showing prices

£9.58

£7.98 ex. VAT · VAT at 20%

Available to order · 1 working day
Available to order · 1 working day
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.Call the technical teamSend a technical question

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Danfoss 1.20 x 60 H nozzle is an oil burner nozzle used in oil-fired boiler and burner assemblies. It meters and atomises the fuel supply into the combustion chamber, with the designation indicating a 1.20 US gal/h nominal flow rate, a 60° spray angle and an H (hollow cone) spray pattern. It is supplied under Danfoss part number 030H6923.

Signs this part needs replacing

  • Sooty deposits or black smoke at the flue, indicating poor atomisation
  • Erratic or unstable flame, or flame lift-off at the burner head
  • Combustion readings that cannot be brought into specification despite correct pump pressure and air settings
  • Rising fuel consumption for the same heat output
  • Visible wear, blockage or damage at the nozzle orifice or filter

Before you order

  • Confirm the required nozzle designation (flow rate, spray angle and pattern) against the burner manufacturer's data plate or commissioning sheet
  • Check the burner model and appliance details to confirm the nozzle body and thread type are correct
  • Verify the pump pressure the burner is set to, as nozzle flow rating is quoted at a reference pressure
  • Check whether the burner has been converted or re-rated since installation, as the required nozzle may differ from the original

Not sure which part?

Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.