Danfoss
Danfoss Nozzle 0.50 x 60 H 030H6908
Danfoss 0.50 x 60 H oil burner nozzle, part number 030H6908, for EOGB Danfoss oil boiler applications.
At a glance
- Also known as 3025064
£9.58
£7.98 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Danfoss 0.50 x 60 H nozzle is a pressure-jet atomising nozzle used in oil-fired boiler burners. It meters and atomises the fuel supply so the burner can produce a stable, clean flame. This nozzle carries the Danfoss part number 030H6908.
Signs this part needs replacing
- Soot deposits on the baffles, heat exchanger or combustion chamber
- A smoky or yellow-tipped flame instead of a clean, steady one
- Rough or delayed ignition, or the burner locking out on start-up
- Rising CO readings or a failed combustion analysis
- Visible wear, erosion or blockage at the nozzle orifice after servicing
Before you order
- Confirm the burner model and check the nozzle designation currently fitted
- Match the flow rating, spray angle and spray pattern exactly to the burner manufacturer's specification
- Check the pump pressure setting, as this affects the delivered flow rate
- Inspect the nozzle seat and holder for damage before fitting a new nozzle
Compliance
| Alternative numbers | 3025064 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.