EOGB
EOGB Danfoss 0.75 x 60 H LE Nozzle
Oil burner nozzle with a 0.75 x 60 H LE marking, supplied for EOGB Danfoss boiler applications.
£45.88
£38.23 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The 0.75 x 60 H LE Danfoss nozzle is a pressure-jet oil burner nozzle supplied by EOGB under the Danfoss name. It meters and atomises fuel oil at the burner head so the fuel can be mixed with air and burned cleanly. The nozzle is marked 0.75 x 60 H LE, which is the identification to match against the existing nozzle on the appliance.
Signs this part needs replacing
- The burner runs roughly, with an unstable or pulsating flame.
- Soot builds up on the burner head, baffles or heat exchanger.
- Smoke or an unusually strong odour is present at the flue.
- Fuel consumption rises without any change in settings or demand.
- The burner repeatedly locks out or fails to establish a stable flame.
Before you order
- Read the marking stamped on the existing nozzle and match it exactly to 0.75 x 60 H LE.
- Confirm the burner and boiler model before ordering, as nozzle ratings are specific to the appliance.
- Check the burner's commissioning data so the replacement nozzle matches the required setting.
- Inspect the nozzle body and sealing face for damage before fitting.
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.