Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Danfoss Nozzle 1.00 x 60 EH 030H6320

Danfoss

Danfoss Nozzle 1.00 x 60 EH 030H6320

Danfoss oil burner nozzle with a 1.00 x 60 EH designation, part number 030H6320, for oil boiler applications.

At a glance

  • Also known as 3025340
Manufacturer part no.
D01-030H6320
Showing prices

£9.58

£7.98 ex. VAT · VAT at 20%

Available to order · 1 working day
Available to order · 1 working day
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.Call the technical teamSend a technical question

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Danfoss 1.00 x 60 EH nozzle is an oil burner nozzle used to atomise fuel oil into a fine spray for combustion. It is identified by the manufacturer part number 030H6320 and is listed within the oil boiler spares range. The nozzle's designation defines its rated flow, spray angle and spray pattern, which must match the burner's commissioning data.

Signs this part needs replacing

  • Soot deposits or blackening around the burner head or combustion chamber
  • Unstable or pulsating flame, or difficulty establishing a flame at start-up
  • Rising smoke number or CO readings at the flue during combustion analysis
  • Poor combustion efficiency with the burner running outside its commissioned settings
  • Nozzle blocked, dribbling or showing a distorted spray pattern on inspection

Before you order

  • Read the designation stamped on the existing nozzle and confirm it matches 1.00 x 60 EH
  • Check the burner manufacturer's data plate and commissioning figures to confirm the required flow rate, spray angle and pattern
  • Confirm the appliance model against the manufacturer's parts list before ordering
  • Nozzles are a service consumable — replace at the interval stated in the burner manufacturer's instructions

Not sure which part?

Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.