Danfoss Nozzle 2.75 x 60 H D01-030H6138

The Danfoss 2.75 x 60 H nozzle is an oil burner nozzle used in EOGB Danfoss oil-fired boiler applications. It meters and atomises the oil supply at the burner head, and its flow rate, spray angle and spray pattern must match the appliance specification. This is a service item that is replaced as part of routine combustion maintenance.

• The flame becomes unstable, noisy or visibly uneven at the burner
• Soot or heavy carbon deposits build up on the burner head or in the combustion chamber
• Smoke readings rise or combustion analysis drifts outside the appliance's set limits
• The boiler becomes harder to start or locks out more frequently
• Fuel consumption increases without a change in demand or settings

• Confirm the flow rate, spray angle and spray pattern letter stated in the appliance or burner manual match 2.75 x 60 H
• Check the burner model fitted to the boiler, as nozzle specification is set by the burner and not the boiler alone
• Have the combustion readings checked after fitting, as nozzle performance directly affects combustion settings