Danfoss
Danfoss Nozzle 1.35 x 45 H 030H4926
Danfoss oil burner nozzle rated 1.35 x 45 H, part number 030H4926, for use in EOGB Danfoss oil boiler applications.
At a glance
- Also known as 3025472
£9.58
£7.98 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Danfoss 1.35 x 45 H nozzle is an oil burner nozzle, part number 030H4926, used in EOGB Danfoss oil-fired boiler applications. It meters and atomises the oil supply at the burner head, and its designation sets the flow rate, spray angle and spray pattern the burner is set up to run. Correct nozzle selection is what allows the burner to achieve a stable flame and clean combustion.
Signs this part needs replacing
- Soot deposits on the boiler baffles, heat exchanger or flue outlet
- Smoke or a visible haze from the flue during a combustion check
- Unstable, pulsating or noisy flame at the burner head
- Rising fuel consumption without a change in demand
- Repeated burner lockouts or failure to establish a clean flame
Before you order
- Confirm the burner model and the nozzle designation specified in the manufacturer's burner or boiler documentation
- Check the required flow rate, spray angle and spray pattern before ordering, as these must match the burner setup
- Inspect the nozzle holder, electrodes and filters at the same time, as contamination is a common cause of nozzle faults
- Check the nozzle body and thread for damage before fitting
Compliance
| Alternative numbers | 3025472 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.