EOGB
EOGB 0.85 x 45 H Nozzle D01-030H4918
EOGB 0.85 x 45 H nozzle for Danfoss oil burner assemblies, metering fuel flow and shaping the spray pattern.
£14.74
£12.28 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The EOGB 0.85 x 45 H nozzle is a pressure-jet oil burner nozzle used on EOGB Danfoss burner assemblies fitted to oil-fired boilers. It meters fuel through the burner and atomises it into the spray pattern required for clean combustion. The designation 0.85 x 45 H denotes the flow rating, spray angle and spray pattern of the nozzle.
Signs this part needs replacing
- Soot deposits or black smoke at the boiler flue during running
- Unstable flame, flame lift-off or a flame that will not hold reliably
- Rough starting, lockouts or repeated ignition failures
- Rising fuel consumption without a change in demand
- Combustion readings that drift and cannot be brought back within tolerance by normal setting adjustment
Before you order
- Confirm the burner or boiler is an EOGB Danfoss unit and that the existing nozzle carries the same 0.85 x 45 H marking
- Check the spray pattern letter and angle against the burner manufacturer's data for the appliance, as these must match the original specification
- Compare the body style and seating of the removed nozzle with the one being fitted before installation
- Plan to check and reset combustion settings after fitting, as nozzle flow affects the air and fuel balance
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.