EOGB
EOGB 0.75 x 45 H LE Nozzle D01-030H4716
EOGB 0.75 x 45 H LE oil burner nozzle for Danfoss burners used on EOGB boilers.
£25.98
£21.65 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The 0.75 x 45 H LE Nozzle is an oil burner nozzle manufactured by EOGB for use with Danfoss oil burners. It meters and atomises the oil supply so the burner can produce a stable, efficient flame inside the combustion chamber. The part number for this nozzle is D01-030H4716.
Signs this part needs replacing
- Soot deposits or black smoke at the boiler flue
- Unstable, noisy or pulsating flame at the burner
- Repeated burner lockouts or failure to establish a flame
- Combustion readings drifting outside the expected range after servicing
- Rising fuel consumption with no change to the heating load
Before you order
- Confirm the burner is an EOGB Danfoss unit and that the existing nozzle is marked 0.75 x 45 H LE
- Check the nozzle size and spray angle against the burner manufacturer's commissioning data for the appliance
- Inspect the nozzle holder, electrodes and leads for damage while the burner is open
- Check the oil pressure and pump settings before fitting, as incorrect pressure affects nozzle output
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.