EOGB
EOGB Danfoss ES Nozzle 2.00 x 80
Danfoss ES oil nozzle rated 2.00 x 80, supplied by EOGB for oil-fired boiler burners.
£14.74
£12.28 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The 2.00 x 80 ES Danfoss nozzle is an oil burner nozzle manufactured by EOGB under the Danfoss range. It is fitted to the burner assembly of oil-fired boilers, where it atomises the fuel oil into a fine spray for combustion. The nozzle's size and spray pattern determine the delivery rate and the shape of the flame within the combustion chamber.
Signs this part needs replacing
- Visible sooting or black smoke at the flue
- Unstable or pulsating flame at the burner
- Combustion readings drifting outside the appliance's set limits
- Soot build-up on the nozzle face or electrode assembly
- Increased fuel consumption without a change in settings
Before you order
- Confirm the burner requires a 2.00 x 80 nozzle, as the flow rate and spray angle must match the appliance settings
- Check the nozzle type (ES) against the specification in the burner or boiler manual
- Inspect the nozzle holder, electrodes and seals while the burner is open, as these are disturbed during replacement
- Arrange a combustion analysis after fitting to verify correct setup
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.