EOGB
EOGB 0.35 x 80 S Nozzle D01-030F8103
EOGB 0.35 x 80 S nozzle for Danfoss burner assemblies used on EOGB boilers.
£20.80
£17.33 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The 0.35 x 80 S Nozzle is a burner nozzle supplied by EOGB for use with Danfoss burner assemblies fitted to EOGB boilers. It meters and atomises the fuel supply so the burner can establish a stable, correctly shaped flame. It is listed under part number D01-030F8103.
Signs this part needs replacing
- Soot deposits or dark smoking at the flue during burner operation
- Unstable or pulsating flame that will not settle after adjustment
- Rising CO readings or combustion analyser results drifting outside the commissioning figures
- Rough starting, lockout or flame failure linked to poor atomisation
- Visible wear, blockage or damage at the nozzle orifice when inspected
Before you order
- Confirm the required flow rate, spray angle and spray pattern against the burner's commissioning data or data plate
- Check the burner is a Danfoss assembly and that the existing nozzle designation matches 0.35 x 80 S
- Have the correct nozzle spanner and a combustion analyser available, as readings must be re-checked after fitting
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.