EOGB
EOGB Danfoss 1.50 x 60 ES Nozzle
Oil burner nozzle with a 1.50 x 60 ES designation, produced by EOGB for Danfoss oil boilers and burners.
£15.16
£12.63 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The 1.50 x 60 ES Danfoss nozzle is an oil burner nozzle produced by EOGB for Danfoss oil-fired boilers and burners. It atomises fuel oil into a fine spray at the burner head so the fuel mixes with combustion air and burns cleanly inside the chamber. The 1.50 x 60 ES designation sets out the nozzle flow rating and its 60° spray angle.
Signs this part needs replacing
- Smoke or soot at the flue, or a rising smoke pump number during combustion testing
- An unstable, pulsating or ragged flame at the burner head
- Higher fuel consumption without a matching change in heat output
- Combustion readings that will not settle, with CO2 or excess air drifting between services
- Visible blockage, weep or drip from the burner head
Before you order
- Read the marking on the existing nozzle and confirm it is 1.50 x 60 ES
- Confirm the burner and boiler model against the EOGB Danfoss fitment
- Check that the spray pattern and angle suit the combustion settings the appliance is commissioned to
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.