Danfoss
Danfoss Oil Nozzle D01-030F6322
Danfoss 1.10 x 60 ES oil nozzle for EOGB Danfoss oil-fired boiler burners, metering and atomising fuel at the combustion head.
At a glance
- Part type: oil burner nozzle
- Also known as 3025384
£9.58
£7.98 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Danfoss 1.10 x 60 ES is an oil burner nozzle used on EOGB Danfoss oil-fired boiler applications. It meters fuel oil and atomises it into a fine spray at the burner combustion head so the fuel mixes correctly with combustion air. The nozzle rating is defined by its flow figure, spray angle and spray pattern.
Signs this part needs replacing
- Soot deposits or black smoke at the boiler flue
- Unstable or pulsating flame, or flame lift-off at the burner head
- Rising CO readings or failed combustion analysis at service
- Hard starting, lockout or rough running during ignition
- Visible wear, blockage or damage to the nozzle orifice or filter
Before you order
- Confirm the existing nozzle is marked 1.10 x 60 ES, as flow rate, spray angle and pattern must match the burner setting
- Check the burner manufacturer's commissioning data before changing the nozzle rating
- Replace the nozzle as part of the normal oil boiler service schedule rather than cleaning and refitting it
- Verify the appliance model against the manufacturer's parts list if the burner has been converted or uprated
Compliance
| Barcode / EAN | 5702425024771 |
|---|---|
| Alternative numbers | 3025384 |
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.