EOGB
EOGB Nozzle 7.00 x 60 S
EOGB 7.00 x 60 S nozzle, listed for EOGB Danfoss boiler applications.
£15.01
£12.51 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The EOGB 7.00 x 60 S nozzle is a burner nozzle supplied under the EOGB brand and listed against the EOGB - Danfoss model designation. It meters and atomises fuel at the burner head, so its size and spray marking directly affect combustion quality. The nozzle carries the size and angle marking 7.00 x 60 S.
Signs this part needs replacing
- Soot deposits, smoke or staining around the burner or flue
- An unstable, pulsating or lifting flame at the burner head
- Combustion readings that cannot be brought back into range during servicing
- Visible wear, erosion or blockage at the nozzle orifice on inspection
Before you order
- Read the marking stamped on the nozzle being replaced and confirm it matches 7.00 x 60 S
- Confirm the burner fitted to the appliance matches the EOGB Danfoss listing shown here
- Check the nozzle body and seat are clean and undamaged before fitting
- Re-check combustion readings and reset the appliance after any nozzle change
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.