EOGB
EOGB Nozzle 1.00 x 30 S
EOGB 1.00 x 30 S nozzle, a Danfoss-pattern burner nozzle intended for EOGB Danfoss boiler applications.
£14.74
£12.28 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The 1.00 x 30 S Nozzle is a burner nozzle supplied under the EOGB brand in the Danfoss pattern. It meters fuel and atomises it into the combustion air stream at the burner head, which is what governs flame shape and combustion quality. It is intended for use in EOGB Danfoss boiler applications.
Signs this part needs replacing
- Black smoke or visible sooting at the flue outlet during normal running
- Flame becomes lazy, yellow or erratic instead of a clean, stable shape
- Difficulty establishing a flame, with repeated lockouts at start-up
- Fuel consumption rises for the same heat output
- Nozzle tip or internal passage shows erosion, blockage or debris on inspection
Before you order
- Read the designation stamped on the existing nozzle and confirm it matches 1.00 x 30 S
- Check the burner data plate for the required nozzle flow rate, spray angle and pattern
- Confirm the appliance is an EOGB Danfoss unit before ordering
- Inspect the nozzle holder and fuel filter at the same time, as contaminants damage a new nozzle quickly
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.