EOGB
EOGB Danfoss 0.50 x 30 S Nozzle
0.50 x 30 S Danfoss nozzle from EOGB, for compatible EOGB Danfoss oil-fired boiler applications.
£14.74
£12.28 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The 0.50 x 30 S Danfoss nozzle is an oil burner nozzle manufactured under the EOGB brand. It is intended for compatible EOGB Danfoss oil-fired boiler applications, where it atomises the fuel supply into the combustion chamber. The nozzle carries a 0.50 flow rating, a 30 degree spray angle and an S spray pattern designation.
Signs this part needs replacing
- Smoke or sooting at the flue that cannot be cleared by burner adjustment
- Rough or delayed ignition with an unstable flame
- Visible wear, blockage or damage at the nozzle tip
- Higher than expected fuel use for the same heat output
- Repeated lockouts after the burner has been serviced and set up
Before you order
- Confirm the required flow rating, spray angle and spray pattern against the burner or boiler manufacturer's specification — the nozzle must match exactly
- Check the appliance model to confirm it falls within the EOGB Danfoss range
- Inspect the nozzle holder, electrodes and oil filter at the same time, as faults there can mimic a failed nozzle
- Have the burner combustion settings checked after fitting
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.