Danfoss
Danfoss Nozzle 6.00 x 80 B
Danfoss 6.00 x 80 B oil burner nozzle for oil-fired boilers, listed for EOGB Danfoss applications.
At a glance
- Also known as 3025892
£13.12
£10.93 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Danfoss 6.00 x 80 B is an oil burner nozzle used in oil-fired boiler applications. It meters and atomises the oil supply at the burner head so the fuel mixes correctly with combustion air. This nozzle is listed for EOGB Danfoss oil boiler applications.
Signs this part needs replacing
- Soot deposits building up on the boiler baffles, heat exchanger or flue
- Erratic or unstable flame at the burner head
- Smoke readings that will not come down to an acceptable level after setting the combustion
- Rising fuel consumption for the same heat output
- Difficulty holding the correct CO2 or excess air figure during commissioning
Before you order
- Read the stamping on the existing nozzle and confirm it matches 6.00 x 80 B exactly
- Confirm the burner make and model fitted to the appliance
- Check the pump pressure and combustion settings the burner is set to before fitting a replacement
- Replace the nozzle as part of a routine service rather than cleaning and refitting it
Compliance
| Alternative numbers | 3025892 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.