Danfoss
Danfoss Nozzle 2.00 x 60 B 030B0113
Danfoss oil burner nozzle with a 2.00 x 60 B designation, part number 030B0113, for oil-fired boiler burners.
At a glance
- Also known as 3025600
£9.58
£7.98 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Danfoss 2.00 x 60 B nozzle is an oil burner nozzle used to atomise fuel oil into a fine spray for combustion. It is listed under oil boiler spares and carries the Danfoss part number 030B0113. The nozzle designation 2.00 x 60 B identifies the specific flow and spray characteristics required by the burner it serves.
Signs this part needs replacing
- Soot deposits building up on the burner head, baffles or heat exchanger
- Smoke or high CO readings at the flue that cannot be corrected by air setting alone
- Unstable or pulsating flame, or difficulty establishing a steady flame on start-up
- Increased fuel consumption for the same heat output
- Nozzle that has reached the end of its service interval or has been sitting unused for a long period
Before you order
- Confirm the nozzle designation stamped on the existing nozzle matches 2.00 x 60 B
- Check the burner manufacturer's data plate and manual for the specified nozzle size and spray pattern
- Inspect the nozzle holder, electrodes and leads at the same time, as faults there can mimic a worn nozzle
- Have the combustion settings checked and re-commissioned after fitting
Compliance
| Alternative numbers | 3025600 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.