Danfoss
Danfoss Nozzle 6.50 x 45 B
Danfoss 6.50 x 45 B oil boiler nozzle, part D01-030B0079, for EOGB Danfoss oil-fired appliances.
At a glance
- Also known as 3025900
£9.76
£8.13 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Danfoss 6.50 x 45 B is an oil burner nozzle used in oil-fired boiler appliances. It meters and atomises the oil supply into the combustion chamber, and its flow rating and spray angle determine how the fuel is delivered to the flame. This nozzle carries the part number D01-030B0079.
Signs this part needs replacing
- Soot deposits building up on the boiler baffles, heat exchanger or flue
- A smoky or visibly unstable flame at the burner
- Rising fuel consumption without a change in demand
- Rough starting, flame failure or lockout during the burner cycle
- The nozzle has been in service for a full annual service interval
Before you order
- Read the marking stamped on the existing nozzle and confirm it matches 6.50 x 45 B
- Check the appliance model against the manufacturer's parts list before ordering
- Confirm the flow rate and spray angle required by the burner setup, as these are not interchangeable
- Have the burner combustion settings checked and reset after fitting
Compliance
| Alternative numbers | 3025900 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Danfoss | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.