EOGB Danfoss 1.50 x 30B Nozzle D01-030B0011

The 1.50 x 30B Danfoss Nozzle is an oil burner nozzle supplied by EOGB under part number D01-030B0011. It is the metering and atomising component that fits at the end of the burner nozzle line, where it controls the flow of oil and shapes the spray pattern delivered into the combustion chamber. It is intended for use on EOGB Danfoss oil-fired boiler burners.

• The flame has become smoky, yellow or visibly uneven compared with normal running.
• Soot deposits appear around the burner head, baffles or heat exchanger.
• Combustion readings drift, with rising CO or falling CO2 for the same settings.
• The burner becomes difficult to light or locks out repeatedly.
• Fuel consumption increases without a change in demand or settings.

• Read the designation stamped on the existing nozzle and confirm it matches 1.50 x 30B, as flow rate and spray pattern must suit the burner.
• Check the burner or appliance documentation for the nozzle it specifies before ordering.
• Confirm the burner is an EOGB Danfoss unit, since the fitment listed covers that range.
• Have the burner combustion settings checked and reset after fitting, as a new nozzle changes the spray characteristics.