EOGB Electrode 1 Piece Block B03-04-390-81819

This is a one-piece electrode block manufactured by EOGB for use in Bentone oil boiler applications. The electrode forms part of the ignition circuit, providing the spark that lights the burner at start-up. It is supplied under manufacturer part number B03-04-390-81819.

• The burner fails to ignite, or ignition is intermittent and requires repeated attempts
• No spark is visible at the electrode tips during a start-up check
• The electrode block is cracked, chipped or shows signs of heat damage
• Insulation around the electrode has broken down, allowing the spark to track to earth
• Carbon or oil deposits have built up on the electrode tips and cannot be cleaned back to a reliable spark

• Confirm the appliance model and burner type against the manufacturer's parts list before ordering
• Check the existing electrode block for damage and compare the part number on the component with B03-04-390-81819
• Inspect the electrode leads and ignition transformer at the same time, as ignition faults are not always caused by the electrode alone
• Verify the electrode gap and positioning requirements for your burner before fitting