EOGB
EOGB Ignition Ionisation HT Cable Kit STG L=350 B03-00-120-68835
Ignition ionisation HT cable kit from EOGB for Bentone boilers, with cable length marking L=350.
At a glance
- Appliance family: Bentone boilers
£81.00
£67.50 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The EOGB Ignition Ionisation HT Cable Kit STG is a high-tension cable assembly used on EOGB Bentone boilers. It carries the ignition voltage to the electrode and the ionisation signal back to the control, forming the link between the burner control and the electrode assembly. The kit is supplied with the cable length marking L=350.
Signs this part needs replacing
- The boiler fails to light or locks out with no spark at the electrode
- Ignition is intermittent, with repeated lockout cycles
- The HT cable insulation is cracked, burnt or chafed
- Arcing or tracking is visible at the cable connectors
- Ionisation flame signal faults cause the burner to shut down after lighting
Before you order
- Confirm the appliance is an EOGB Bentone unit
- Check the existing cable routing and length against the L=350 marking
- Check that the electrode and control terminations match the original connections
- Have the part number B03-00-120-68835 to hand when ordering
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Bentone | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.